CV-1: Carving vice is easy to use
& build quality is exceptional. The
mounting plate can be traversed
through 360 degrees & positioned
as required.
Tightening the yellow handle sets
the required position. By pressing
the black button the handle can
be dropped down out of the way
for easy access for carving.
At this point the socket screw is
tightened with the supplied allen
key. This securely clamps the -
This double locking system ensures
zero movement in any direction.
mounting plate can be traversed
through 360 degrees & positioned
as required.
Tightening the yellow handle sets
the required position. By pressing
the black button the handle can
be dropped down out of the way
for easy access for carving.
At this point the socket screw is
tightened with the supplied allen
key. This securely clamps the -
This double locking system ensures
zero movement in any direction.
The mounting plate is hydraulically pressed & welded. The plate is drilled with 6 holes for mounting the carving blank to.
The unit is supplied with one mounting plate as standard & further mounting plates can be purchased separately so that
carving projects can be changed over quickly.
The unit is supplied with one mounting plate as standard & further mounting plates can be purchased separately so that
carving projects can be changed over quickly.
Optional Extras:
SMP1/ CV-1 - Spare mounting plate.
BB/ CV-1 - Base board for mounting the base plate too
& clamping to bench. (Clamps not included).
SMP1/ CV-
Base plate: 125mm Deep x 80mm Wide x 152mm High
excluding the mounting plate.
Mounting plate: 70mm Diameter x 140mm
Long mounting shaft.
excluding the mounting plate.
Mounting plate: 70mm Diameter x 140mm
Long mounting shaft.
Base board in 15mm thick birch ply.
CV-1
CV-1
CV-1
CV-1
SMP1/ CV-1
Website Design By: Mech Tech Industries Ltd.
TELEPHONE: 01756 795354
©
mech tech industries ltd. 2024