©
mech tech industries ltd. 2020
Website Design By: Mech Tech Industries Ltd.
TS/ 7 - This stand is ideal for the tiles which are of
Different widths and heights. The unit securely supports
the tile at the side of the unit for safety. We can -
smaller slots to take narrow tiles, a combination of thin
& wide tiles. The unit is manufactured in a strong birch
ply with a hard wearing textured polypropylene finish both
sides. A nameplate can be fitted at extra cost if required.
H. 90mm x D. 583mm x W. 370mm
the tile at the side of the unit for safety. We can -
smaller slots to take narrow tiles, a combination of thin
& wide tiles. The unit is manufactured in a strong birch
ply with a hard wearing textured polypropylene finish both
sides. A nameplate can be fitted at extra cost if required.
H. 90mm x D. 583mm x W. 370mm
TS/7
TS/ 48 - This stand is ideal for the tiles which are of
Different widths and heights. The unit securely supports
the tile at the back of the unit for safety. We can -
smaller slots to take narrow tiles, a combination of thin
& wide tiles. The unit shown to the left is shown in -
Lengths can be manufactured to order. The unit is
manufactured in a strong birch ply with a hard wearing
textured polypropylene finish both sides.
H. 120mm x D. 500mm x L. 4800mm
the tile at the back of the unit for safety. We can -
smaller slots to take narrow tiles, a combination of thin
& wide tiles. The unit shown to the left is shown in -
Lengths can be manufactured to order. The unit is
manufactured in a strong birch ply with a hard wearing
textured polypropylene finish both sides.
H. 120mm x D. 500mm x L. 4800mm
TS/ 48
Technical Note:
Being manufactured in
ply these display units
are stronger than ones
made in m.d.f. Due to
the multi-ply construc-
tion.
The finish on these is
a hard wearing poly-
is much superior to a
painted stand that can
mark easily.
Being manufactured in
ply these display units
are stronger than ones
made in m.d.f. Due to
the multi-
The finish on these is
a hard wearing poly-
is much superior to a
painted stand that can
mark easily.
CTS/16
WT2
WT 2 - This stand is ideal for the longer & narrow wood effect tiles.
The unit securely supports the tile in the base of the unit for safety.
We can manufacture the unit in many configurations for example:
smaller slots to take narrow tiles and a combination of thin & wide
tiles. The unit is manufactured in a strong birch ply with a hard -
will take tiles 255mm w. x 10mm thick.
H. 76mm x D. 290mm x W. 302mm
We can manufacture the unit in many configurations for example:
smaller slots to take narrow tiles and a combination of thin & wide
tiles. The unit is manufactured in a strong birch ply with a hard -
will take tiles 255mm w. x 10mm thick.
H. 76mm x D. 290mm x W. 302mm
CTS/ 16 - This counter top stand will take 16 no. sample
Tiles 150mm x 150mm x 20mm thick. We can manufacture
the unit in many configurations for example: smaller slots
to take narrow tiles and a combination of thin & wide tiles.
The unit is manufactured in a strong birch ply with a hard
wearing textured polypropylene finish both sides. Fitted
with a nameplate which we can add your logo in vinyl or
our printing service.
H. 73mm x D. 366mm x W. 342mm
the unit in many configurations for example: smaller slots
to take narrow tiles and a combination of thin & wide tiles.
The unit is manufactured in a strong birch ply with a hard
wearing textured polypropylene finish both sides. Fitted
with a nameplate which we can add your logo in vinyl or
our printing service.
H. 73mm x D. 366mm x W. 342mm